160watt Flash Light

Flash lights are essential and standard equipment for photography. It has a remote sensor, built in umbrella holder and angle adjustable fixture. Flash lights are useful in indoor light shoot and outdoor night shoots.

160 watts FLASH is a quality strobe light with an exceptional value for commercial studios, location photographers, photo schools, students and amateurs as well.

160 watts FLASH can be used as a main light, side light, hair light, or back light for a single-head portrait, product advertisement, or document duplication.

Power Input          : AC110-130 volt, 60 Hz or AC200-240 volt, 
50 Hz
Flash Power          : 160watts/sec (joule) in full
Guide No.              : 120ft/36m ISO100
Color Temperature  : 5600K
Flash-tube Lifetime : over 8,000 typical flashing
Power Setting        : 1/16 to full continuously
Recharge Time       : 0.5-3 seconds in full
Flashing Duration    : 1/600 sec. @t=0.1; 1/1000 sec. @t=0.5
Slave Effectiveness : 35ft /10m
Lighting Range        : 55 degree
Modeling Power       : Halogen 75watts
Bulb Base              : E-14 screw
Synch Voltage        : 5volt
Fuse                     : 5A
Dimension              : f4´7-1/2 (f100mm ´ 195mm)
Weight                  : 1.8Lb (800g)

Safety Cautions:

• Keep the internal surface of reflector clean, and wipe off the dust 
  with soft cloth after turn off the power supply.
• Keep the power on ONLY when the light needs to be in use. Save 
  your 160 watts FLASH in a dried and safe place after use.
• Rocking and vibration could damage your 160 watts FLASH when it is in use.
• Frequent power on/off would damage the bulb or shorten its lifetime.
• Do not try to relocate your 160 watts FLASH when it is in use.

• Bulb.
• 160 watts/sec Flash/strobe light.